Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10.

APPLICATIONS

Isolastic is a latex additive to be mixed with Kerabond Plus to improve the performance and deformability to satisfy class C2 S2 (improved cementitious adhesive and class S2 (highly deformable adhesive) according to AS ISO 13007 requirements. Adhesives obtained this way are suitable for interior and exterior bonding of all types of ceramic tiles (double-fired, single-fired, quarry tiles, klinker, terracotta, glass mosaics, porcelain tiles, etc.) and stone material on conventional substrates, on concrete, precast concrete panels as long as well cured (3 months), heating panels, fibrous cement, plaster board and wood or wood composition panels as long as they are firmly fixed. Installations can be carried out over gypsum-based or anhydrite surfaces only if specifically primed beforehand.

WHERE TO USE

ISOLASTIC + KERABOND, KERABOND T and KERABOND PLUS
For interior and exterior bonding of:
· ceramic tiles of every type (double fired, single fired, grès, klinker, glass mosaic, porcelain tiles, etc.);
· stone material as long as it is dimensionally stable.

TECHNICAL DATA

 Mixed with Kerabond Plus:
Pot life: over 8 hours.
Open time: 30 minutes.
Grouting:
- walls: 4-8 hours
- floors: 24-36 hours
Set to light foot traffic: 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12002: S2 - highly deformable
Application: Kerabond Plus: notched trowel n. 4 or 5 or 6.
Storage: 24 months. Protect from frost.
Consumption: 1-2 kg/m2.
Packaging: 6.6kg and 25kg drums

Technical data sheet

Safety Data Sheet